DTF Transfer Instructions
Heat press instructions for DTF transfers
Equipment needed to get started:
- Heat Press Machine
- DTF Transfers
- Garment for application
- Kraft transfer paper (recommended)
Step 1
Peel clear transfer sheet with image away from backing.
Step 2
Apply transfer to hard surface.
Step 3
With squeegee or fingers press transfer everywhere, ensure adhered.
Step 4
Peel clear transfer sheet off slowly.
Step 5
Any parts not adhering lay transfer back and re-apply pressure.
If any parts of the design aren't stuck
Re-apply pressure and repeat steps above
UV Sticker Instructions
Instructions for UV sticker transfers
Equipment needed to get started:
- Squeegee
- Clean Surface
- Hard Surface Item
Step 1
Peel clear transfer sheet with image away from backing.
Step 2
Apply transfer to hard surface.
Step 3
With squeegee or fingers press transfer everywhere, ensure adhered.
Step 4
Peel clear transfer sheet off slowly.
Step 5
Any parts not adhering lay transfer back and re-apply pressure.
If any parts of the design aren't stuck
Re-apply pressure and repeat steps above